Xerox 4500 ps eth instruction manual Now make other Nprinter configuration if so required

Novell Setup for IPX/SPX

Xerox 4500 PS ETH, Inst. & Operator's Guide

12.Then from the “ Print Server Configuration” menu select “Printer Configuration” and press ENTER

13.From the list “ Configured Printers” select either an already configured printer to change or select one of the printers “ Not Installed” and press ENTER.

Notice that the number of the printer must correspond to the ENP number in the PrintServer configuration of ENPs. The default PrintServer ENP numbers are 0 and 1.

14.Type a name for the printer in the ” Printer X Configuration” menu

15.Select “Type” and press ENTER and select “Remote Other/Unknown”.

Now make other NPRINTER configuration if so required

16.Press ESC to leave the menu and select YES to save changes.

17.Press ESC to return to the “ Print Server Configuration” menu.

18.Select “Queues Serviced by Printer” and press ENTER

19.Select the appropriate printer and press ENTER.

20. Press INS and select the queue for the printer, then press ENTER

21.Select “Priority” for the printer

22.Press ESC six times and answer YES to exit PCONSOLE

Proceed to the configuration of the various settings.

For configuration details, see chapter 3.

90