Xerox 4500 ps eth Reboot PrintServer, Trace destination, PrintServer Tracedestinationparameters

Configuration

Xerox 4500 PS ETH, Inst. & Operator's Guide

3.5.9 Reboot PrintServer

In the sub-menu for the “Configure PrintServer” select “Reboot PrintServer” by typing R at the selection prompts. Follow the instructions on the screen.

3.5.10 Trace destination

Type T at the selection prompt to enable the trace facility.

<PrintServer> Tracedestinationparameters 0xx.xxx

A)	FTP Host Name	..............:
B)	User Name	:
C)	Password	:
D)	File Name	:

S)	Start Trace
T)	Stop Trace
X)	Return

not tracing !

indicates the trace status

Type e.g. A (FTP Host Name) to be prompted for making entries to the trace destination parameters.

Press Enter when you have made your entries.

NOTE:

By default all sessions have trace enabled

63