Xerox 4500 ps eth Configure Sessions, Change Password, Configure sessions, Enabled, Printer

Configuration

Xerox 4500 PS ETH, Inst. & Operator's Guide

3.5.4 Configure Sessions

“+” Means that Trace has been activated

Means session is active

In the sub-menu for the “Configure PrintServer”, select “Configure Sessions” typing B at the selection prompts. You will see the following screen:

<PrintServer>				Configure sessions			0xx.xxx
No.		Enabled		Session Description
1		YES*		+PPD 5001 --> IPDS DATA --> PRINTER
2		YES*		+PPD 5002 --> IPDS DATA --> PRINTER
3		YES*		+LPD q: LPDPRT1	--> PRINTER
4		YES*		+LPD q: LPDPRT1ACR	--> PRINTER
5		YES*		+ENP PNO:0	-->PRINTER
6		YES*		+SNA Print --> SCS data		--> PRINTER
7	___		_________________________________
8	___		_________________________________
9	___		_________________________________
10	___		_________________________________
11	___		_________________________________
12	___		_________________________________
13	___		_________________________________
14	___		_________________________________

T) Trace U) Untrace S) Status D) Delete E) Edit X) Return Enter action:

To edit a specific sub-menu, type E (Edit) and the required parameter to modify and then press <ENTER>.

3.5.5 Change Password

In the sub-menu for the “Configure PrintServer” select “Change Password” by typing F at the selection prompts.

You are now prompted for the old password.

<PrintServer>		ChangePassword		0xx.xxx
	Old Password:		******

When entered, you will be prompted for a new password.

Finally, the new password must be re-entered to be confirmed by the system.

61