Xerox 4500 ps eth instruction manual BOOTP process

Configuration

Xerox 4500 PS ETH, Inst. & Operator's Guide

3.7.1 BOOTP process

So far, this chapter has only been dealing with the setting up of the PrintServer from a BOOTP server. However, the PrintServer can also be equipped with a so-called “ default configuration”. This default configuration will be carried out if the PrintServer cannot detect a BOOTP server at the time the PrintServer is powered on. The default settings are similar to the ones defined on the BOOTP server. For an illustration of this boot event, please see the flow chart below.

Power ON

Attach to

LAN

Send BOOTP	NO
request
YES	NO

Transmit BOOTP	Answer	NO
request	from BOOTP
	server??
	YES

Read BOOTPTAB file:

- IP address

- bootfile (if any) - microcode file

Default config. present??

YES

Load default IP address

Ready to print

Default Configuration

79