Xerox 4500 ps eth instruction manual Printing command example

Novell Setup for IPX/SPX

Xerox 4500 PS ETH, Inst. & Operator's Guide

Configuring the ENP via configuration file, see chapter 3.

The following keywords are ENP specific and must be specified in either TELNET, PSinst32 or the configuration file.

ENP mode:	Selects which mode to use.
	Options are Bindery and DS mode.
ENP printer number:	Selects which Novell NetWare
	printer number to use.
Printserver:	Selects which Novell NetWare
	printserver to use.
Fileserver:	Selects which Novell NetWare
	fileserver to attach to.

NOTE: The Xerox 4500 PS ETH is able to support up to 2 ENPs. Each Xerox 4500 PS ETH with a defined EPS is able to support up to 16 ENPs.

Printing command example

When the user wishes to send a print job to the attached printer, the following command can be used:

Example: NPRINT MYPRINT Q=PQ2

Where PQ2 is the queue supported by the NPRINTER.

This functionality is set via keyword parameters in the configuration file.

88