Xerox 4500 ps eth instruction manual NetWare setup - DS mode PrintServer and NW4.1x Configuration

Novell Setup for IPX/SPX

Xerox 4500 PS ETH, Inst. & Operator's Guide

4.5NetWare setup - DS mode: PrintServer and NW4.1x Configuration

This description allows you to quickly configure one NetWare 4.1X Server including PrintServer, Printer and Queue plus the Xerox PrintServer for Native printing via IPX/SPX.

During this description, we will be using the “Nwadmn95/NT” GUI administration tool for the configuration of NetWare and the i-data PrintServer Configuration Tool, “PSinst32”, for the configuration of the Xerox PrintServer.

When setting up, it is important that you make sure you have always defined a PrintServer, a Printer and a Queue on the NetWare System. Using the “Print Services Quick Set-up...” you can define all of this in one step.

Start the Nwadmn95/NT:

Browse through the NDS Tree and highlight the Container Object in which the PrintServer, Printer and Queue should be located. Select “TOOLS” from the Menu Bar and then “Print Services Quick Set-up”:

Type in the name of the PrintServer to create it or use the “Browse” button next to the PrintServer Name window to browse the NDS Tree for existing PrintServers (only if the EPS is not going to be used in the Xerox PrintServer, meaning that the PSERVER.NLM is loaded on a NetWare File Server).

Type in the name of the Printer to be created and set the Type to “Other/Unknown”.

91