Xerox 4500 ps eth instruction manual PSS/MVS AFP Printing Using TCP/IP, Requirements, MTU size

PSS/MVS AFP Printing Using TCP/IP

Xerox 4500 PS ETH, Inst. & Operator's Guide

15. PSS/MVS AFP Printing Using TCP/IP

This chapter provides:

JES installation statements

PSS Startup Procedure

PSS Printer Profile

Once these parameters have been configured and the basic TCP/IP installation of the PrintServer (non-IPDS) has been completed, direct AFP/ICDS from PSS / MVS will be possible.

Requirements:

-use of ida PSS, version 6.01 or higher

-use of TCP/IP for MVS, version 2, release 1

MTU size

Gateway statement for TCP/IP profile

∙The Maximum Transmission Unit (MTU) of the IP packet for the MVS system is recommended to be set up to 2000.

NOTE: The MTU size should not exceed the maximum size sent through the control unit. Failure may lead to transmission problems.

15.1 Sample PSS/MVS JES2 initialisation statements

FSSDEF(PSS4) PROC=PSS4,HASPFSSM=HASPFSSM

/* From the system PARMLIB

PRT410,CLASS=A,DRAIN,MODE=FSS,ROUTECDE=PSS410,FSS=PSS4 PRMODE=(LINE,PAGE),UCS=0,WS=(W,R,Q/F)

PRT411,CLASS=A,DRAIN,MODE=FSS,ROUTECDE=PSS411,FSS=PSS4 PRMODE=(LINE,PAGE),UCS=0,WS=(W,R,Q/F)

Example of PSS/MVS JES2 printer definition

136