Xerox 4500 ps eth SNA IPDS and SCS Printing from MVS or VM, Logmode, IPDS printer, SCS printer

SNA IPDS and SCS Printing from MVS or VM

Xerox 4500 PS ETH, Inst. & Operator's Guide

14.SNA IPDS and SCS Printing from MVS or VM

This chapter provides:

-sample LU1 printer logmode definitions for SCS and IPDS print

-sample definitions for installation in association with a locally attached 3174 and 3745

-sample definitions for installation in association with a locally attached 3174 and a downstream OS/2 gateway.

-method of configuring a Novell SAA gateway so as to attach an

PS as a PU type 2.

- notes on use of FSL configuration

Once these definitions have been configured, performing direct printing via

SNA will be possible.

Requirements:

-Xerox 4500 PS ETH (equipped with FSL top) with 3270 code for SCS printing .

-Xerox 4500 PS ETH IPC(IPDS) for IPDS printing.

14.1Logmode

The Xerox 4500 PS ETH uses standard IBM LU1 printer logmodes. Please refer to your IBM VTAM documentation for particular configurations that best meet your network requirements. Two sample definitions are listed below:

IPDS printer:		SCS printer:
IPDSPSF1 MODEENT LOGMODE=IPDSPSF1,		RSCSPRT1 MODEENT	LOGMODE=RSCSPRT1,
FMPROF=X'03',	X	FMPROF=X'03',	X
TSPROF=X'03',	X	TSPROF=X'03',	X
PRIPROT=X'B1',	X	PRIPROT=X'B1',	X
SECPROT=X'B0',	X	SECPROT=X'30',	X
COMPROT=X'7080',	X	COMPROT=X'7080',	X
SRCVPAC=X'02',	X	SSNDPAC=X'00',	X
RUSIZES=X'85C7',	X	SRCVPAC=X'00',	X
SSNDPAC=X’00’,	X	RUSIZES=X'8787',	X
PSNDPAC=X'02',	X	PSNDPAC=X'80',	X
PSERVIC=X'014000010000000001000000'		PSERVIC=X'01000000E100000000000000'

125