Xerox 4500 ps eth instruction manual National language selection Cpgid, Example

Installation

Xerox 4500 PS ETH, Inst. & Operator's Guide

2.1.2 National language selection - CPGID

When you have selected either EU or US settings, you should also check that you have the correct default codepage for your national language.

Use the program MakeITDS - supplied with this kit - to change the CPGID. In the following you will find guidelines for entering the CPGID default value in the MakeITDS program.

Make a settings printout (e.g. via the test key) containing IPDS settings and the IPDS resident codepages. The IPDS settings will state the default codepage (CPGID - Code Page Global ID). See the example of the IPDS settings in the following.

Example:

IPC - SETTINGS PRINTOUT

Firmware Version :Sxx xxx xxx

Basic Information

Installed	Memory	:	2 Mbytes
Installed	Interface	:	Ethernet

IPDS Setup

IBM Emulation	: 4028
Default Codepage (CPGID)	: 01F4H (500)
Codepage Version	: 1

In the test page containing the IPDS resident code pages you will find the decimal number (second column) to be specified.

Appendix E contains a list of IPDS resident code pages.

In the MakeITDS (idaSetup) program, you must open the menu “IPDS Setup” (see section 2.5.2 in the accompanying manual). In the entry field “Default CPGID” you must enter the decimal number for the required national language.

Example:

You wish to change to the Japanese (English) code page.

Enter decimal no. 281 in the entry field for CPGID.

16