Xerox 4500 ps eth instruction manual Entry Fields, Version, Host Configuration

UNIX Printing Using TCP/IP LPR/LPD

Xerox 4500 PS ETH, Inst. & Operator's Guide

	[Entry Fields]
NAME of queue to add	[your name]
ACTIVATE the queue?	yes
Will this become the DEFAULT queue?	no
Queuing DISCIPLINE	first come first served
ACCOUNTING FILE pathname	[]
DESTINATION HOST for remote jobs	[your host]
Pathname of the SHORT FORM FILTER	[/usr/lpd/bsdshort ]
for queue status output
Pathname of the LONG FORM FILTER	[/usr/lpd/bsdlong ]
for queue status output
Name of QUEUE on remote printer	[LPDPrt1]
NAME of device to add	[LPDPrt1]
BACKEND PROGRAM pathname	[/usr/lpd/rembak]

NOTE:

Make sure that the pathname of the short and long form filter are modified to bsdshort/bsdlong.

The name of QUEUE on remote printer and NAME of device to add should be the same and one of the following

LPDPrt1

LPDPrt2

LPDPrt1acr

LPDPrt2acr

Once the printer has been defined, printing can be performed using the lp, lpr, qprt or enq commands.

Version 4.1

Before you can print via AIX version 4.1, the following 2 steps must have been completed.

1.Host Configuration

You must make sure that the Xerox 4500 PS ETH is defined as a host system. This can be done by using the smit command. Use of this command requires root authority (i.e. use the su command to switch to the root user). Alternatively, you may add the additional IP entries manually by editing the /etc/hosts file and appending the additional IP address and name for the Xerox 4500 PS ETH.

104