Xerox 4500 ps eth instruction manual 130

SNA IPDS and SCS Printing from MVS or VM

Xerox 4500 PS ETH, Inst. & Operator's Guide

;						I D A P S
;*************************************#**********************************
BEGIN_CONFIGURATION				IDAPS
		LOCAL_MAC		40005A01C302; Set LOCAL MAC-address
		SEL_MAC		LOCAL		; Use universal MAC-address
		EARLY_TOKEN		YES		; Early Token Release DISABLED.
		ENABLE_TCPIP		YES		; ENABLE TCP/IP protocol.
		ENABLE_NETWARE YES				; ENABLE Netware protocol.
		ENABLE_802_2		YES		; ENABLE 802.2 protocol.
		ENABLE_PU_LU		YES		; ENABLE PU/LU protocol.
		BOOT		YES		; Reboot PS if conf. has changed.
		SHARETIMEOUT		20		; Share timeout (sec.)
		HOLDTIMEOUT		600		; Timeout for OFFLINE condition (sec.)
		IRQTIMEOUT		60		; Timeout for IRQ forwarding (Sec.)
END
;*************************************#**********************************
;						T C P I P
;*************************************#**********************************
BEGIN_CONFIGURATION TCPIP
	HOSTNAME			"idaPS0006"		; The TCP/IP host name of the PS
	BOOTP			NO		; Boot from BOOTP server
	TCP_MSS			1400		; Message Segm ent Size
	TCP_WINDOW			4200		; Receive window
	DEFAULT_IP			192.0.16.12		; IP-address if not booted by BOOTP
	DEFAULT_SM			255.255.0.0		; Subnet Mask if not booted by BOOTP
	DEFAULT_GW			192.0.16.3		; Gateway addr. if not booted by BOOTP
END
;*************************************#**********************************
;						P U
;*************************************#**********************************
BEGIN_CONFIGURATION PU
	BLOCKNUMBER		05D		; Fill in your Block number
	IDNUMBER		12345		; Fill in your ID number
	REMOTE_MAC		40005A0001C3; Fill in HOST / GW MAC address
	LOCAL_SAP		4		; Fill in your local SAP value
END	REMOTE_SAP		4		; Fill in your HOST SAP value

&&??

130