Xerox 4500 ps eth TCP/IP Configuration, Remember to set “TCP/IP enabled” to YES, ConfigureTCP/IP

Configuration

Xerox 4500 PS ETH, Inst. & Operator's Guide

Enter Selection

To make an entry for the local MAC address, type A. This will place you in the prompt for the local MAC address. If the entry is incorrect, you will receive an error message.

To return to the “Enter Selection” prompt, press Enter.

For action fields other than text entries (e.g. MAC Address) use the space bar to toggle the entry options.

TCP/IP Configuration

Remember to set “TCP/IP enabled” to YES.

<PrintServer>		ConfigureTCP/IP		0xx.xxx
	A)	..............................HostName
	B)	Use BOOTP Server	:
	C)	TCP MSS	:
	D)	TCP Window	:
	E)	Default IP address	:
	F)	Default SubNet Mask	:
	G)	Default Gateway Address :...
	H)	Microcode Filename	:

You may use this entry field to write specific information on e.g. target printer:

NET1stFloor or John Doe’s lpt. A maximum of 15 characters is recommended for host name

	X) Save and Return	Z) Return without saving
EnterSelection

56