Xerox 4500 ps eth instruction manual 11.1 AS/400 controller definition, All

AS/400 SCS Printing Using SNA

Xerox 4500 PS ETH, Inst. & Operator's Guide

11.1 AS/400 controller definition

The CRTCTLRWS command is used to create a Remote Work Station Controller.

The following example shows the values required to create a controller called PS3174.

	Create Ctl Desc (Remote WS) (CRTCTLRWS)
Type choices, press Enter.
Controller description . .		. . . CTLD	> PS3174
Controller type		. . . TYPE	> 3174
Controller model		. . . MODEL	> 0
Link type		. . . LINKTYPE	> *LAN
Online at IPL		. . . ONLINE	*YES
Switched line list . . . .		. . . SWTLINLST	> XXXXXXXXXX
		+ for more values
Maximum frame size . . . .		. . . MAXFRAME	*LINKTYPE
Exchange identifier . . .		. . . EXCHID	> YYYYYYYY
Initial connection . . . .		. . . INLCNN	*DIAL
Dial initiation		. . . DIALINIT	*LINKTYPE
LAN remote adapter address		. . . ADPTADR	> ZZZZZZZZZZZZ
Autocreate device . . . .		. . . AUTOCRTDEV	*ALL
Text 'description' . . . .		. . . TEXT	> 'SNA PS 23 in Sales'
More...	F9=All parameters	F11=Choices F14=Command string		F24=More keys

The value XXXXXXXX used for SWTLINLST must be replaced by the name of the LAN adapter being used on the AS/400

The value YYYYYYYY used for EXCHID must be the same as the Block and ID Numbers of the Xerox 4500 PS ETH. The default value is 05D00000.

The value ZZZZZZZZZZZZ used for ADPTADR must be the same as the MAC address of the Xerox 4500 PS ETH. The default value is Universal MAC address indicated on the side of the Xerox 4500 PS ETH. The current value can be found on the first page of the test printout.

119