Xerox 4500 ps eth instruction manual Appendix F Error messages, Error code = %x

Appendix Section

Xerox 4500 PS ETH, Inst. & Operator's Guide

Appendix F: Error messages

The error codes stated below may occur during operation. If you are faced with an error situation, i.e. if a Fatal error or an Error code occur, you should contact your system administrator or your local i-data distributor for help and assistance.

Valid error levels:

Information

Warning

Error

Fatal Error

Error code	Error level	Description
0x4604	F	Internal logical error
0x4700	E	ICDS scanner error, ICDS command =
		%x, error code = %x

The error code (E) is a bitmap with the following definition:

		0x01	Data truncated
		0x02	Unsolicited data
		0x04	Lacking parameter
		0x08	Surplus parameter
		0x10	Unknown command
0x4701	E	ICDS driver detected error, ICDS
		command = %x, error code = %x

The following error codes (E) are defined:

0x00	Driver has been cancelled
0x01	Range check
0x02	Printer lost
0x03	State check
0x04	Sequence check
0x05	Memory exhausted
0x06	Undefined font
0x07	Undefined macro
0x08	Deadlock timeout
0x09	Path error
0x0a	Not supported

189