Xerox 4500 ps eth instruction manual Windows NT Printing Using TCP/IP LPR/LPD, Windows NT version

WIndows NT Printing Using TCP/IP LPR/LPD

Xerox 4500 PS ETH, Inst. & Operator's Guide

8.Windows NT Printing Using TCP/IP LPR/LPD

Windows NT version 3.51

This section describes how to select an LPR/LPD printer from Windows NT version 3.51.

1.From the Main menu select the icon “ Control Panel”.

2.Select the “Network” icon.

Make certain that the entry “ Microsoft TCP/IP Printing” is entered into the menu “Installed Network Software”.

If not, click on “ Add Software”.

From here you select the above mentioned network software from the list.

For details on installation, refer to your Windows NT documentation.

3.From the “Control Panel” menu select the “ Printer” icon.

4.From the “Print Manager” select the menu “ Printers” and double-click on “Create Printers”.

5.Enter a name for the printer in “ Printer Name”.

6.Select appropriate driver.

7.From the pull-down list in “ Print to”, select the option “ Other”.

8.From the list in “ Print Destination” select “LPR Port”.

9.Press “OK” to confirm.

10.You are now prompted to enter the IP address of the Xerox 4500 PS ETH and the name providing LPD.

11.In the menu “Name of printer on that machine” you make an entry for the default configuration “LPDPRT1”.

12.Press “OK” to confirm.

An LPD printer has now been added.

108