Xerox 4500 ps eth instruction manual Setting up the TFTP Daemon, TFTP in AIX Environment

Configuration

Xerox 4500 PS ETH, Inst. & Operator's Guide

3.7.2 Setting up the TFTP Daemon

For the BOOTP server to download the settings to the print server, TFTP must be enabled.

TFTP in AIX Environment

The TFTP daemon is normally managed by the INETD super-daemon. The INETD starts a TFTPD when a request is received. The TFTPD satisfies the request and then dies. You need to configure INETD so that it performs this service. This can be done in the following way using the SMIT command (System Management Interface Tool):

NOTE: It can only be done with superuser a uthority (i.e. use the su command to switch to root user).

1.Type SMIT.

2.Select the following items in order to configure the TFTP daemon.

-Communications Applications and Services

-TCP/IP

-Further Configuration

-Server Network Services

-Other Available Services

-Super Daemon (INETD)

-INETD Subservers

-Add an INETD Subserver

3.When the menu “Available Subservers” appears, use the “LIST” function .

NOTE: The TFTPD will only be on the list if not already created.

You can also check /etc/inetd.confto see whether the tftpd line is commented out. But you should use SMIT to update inetd.conffor TFTPD. Do not update /etc/inetd.confmanually for TFTPD as you would for the BOOTPD.

SMIT does not allow you to place the BOOTPD under INETD. The /etc/inetd.conffile must be updated manually for the BOOTPD.

You should ensure that there is no /etc/tftpaccess.cfgfile. It can be used to control access to files by remote TFTP users.

80