Xerox 4500 ps eth instruction manual Uu020.B80 Microcode level 2, product

Appendix Section

Xerox 4500 PS ETH, Inst. & Operator's Guide

uuis the specific firmware number XX represents version

Y represents variant

ZZ represents release no. - generally not stated.

e.g.: 0uu020.B80

(microcode level 2, < > product (0))

∙ Ensure that TFTP read access to this file is allowed.

4.Restart the BOOTP server. The PrintServer checks for new microcode.

5.Power the PrintServer off and back on again.

NOTE:

A microcode upgrade will only be performed if the name of the microcode file is different from the name of the version currently operating in thePrintServer.

6.“PSX3 5108 Awaiting microcode download” message is now printed.

7.During download, the LEDs will be blinking alternately.

8.Now print a Test Page (by pressing Test button) and check that the Version number on the test printout has changed to the new Version (see the following section: “Problem Determination”).

185