Xerox 4500 ps eth instruction manual No -a

PSF/AIX Printing Using TCP/IP

Xerox 4500 PS ETH, Inst. & Operator's Guide

The "no" commands must be run each time the AIX system is started. Adding the "no" commands to /etc/rc.net is a convenient way of automating this step.

Adding e.g.

no -o tcp_keepidle=480

no -o tcp_keepintvl=80

to /etc/rc.net causes the TCP to send a KEEPALIVE transmission if a TCP connection has been inactive for 4 minutes and the application requested KEEPALIVE transmissions, as AIX now does. AIX recommends these TCP configuration settings to customers who use TCP/IP attached printers and the device.

To view current settings enter

no -a

When the installation and configuration procedures for the PSF/AIX have been completed, you are ready for printing.

145