Xerox 4500 ps eth instruction manual When configuring

Problem Determination

Xerox 4500 PS ETH, Inst. & Operator's Guide

PRT LED flashes slowly

∙Check that a printer intervention is not pending.

∙Check that either a PCL or PostScript printer is attached.

Message AIN1049

Communication failure

∙Check that the printer is ready (powered on and on-line).

∙Check cabling.

19.2.2When configuring

The following guidelines help you detect problem areas, particu larly when configuring the PrintServer.

BOOTPTAB file errors

You should avoid making the following syntax errors in the bootptab file:

∙Line continuation character must be " \ " (i.e. backslash)

∙Do not leave out " : " after tag values

∙Remember to keep comments on separate lines

(Comment lines are indicated as blank lines, spaces or a number sign (i.e. " # ").

Does the printer indicate an error message?

(for example status code, alarm and so on)

∙Check the connection to the PrintServer.

∙Check for printer physical errors (for example paper jam, out of paper, toner out, and so on).

Does the LED status of thePrintServer appear normal?

∙Check for status of the LEDs.

151