Xerox 4500 ps eth Configuration using Setup File, Setup File Identifier, ??##N1,0#, ??space

Configuration

Xerox 4500 PS ETH, Inst. & Operator's Guide

3.6 Configuration using Setup File

Only modify or change the settings via the configuration file if strictly necessary.

Otherwise, you are recommended to use one of the other configuration tools (see above)

The sample configuration files supplied with the PrintServer may be used to configure or re-configure the product. The files may be sent directly via the LAN. The protocols used may be programmed in the PrintServer.

Setup File Identifier

The configuration file must be started with the following string:

&&??##N1,0#

and be terminated with this string.

&&??<space>

These strings are used for identifying the setup file when being downloaded. They must not in any way be altered.

You are recommended to stop all printer sessions before the downloading of (new) configuration settings as active print sessions may be interrupted.

Default settings for the PrintServer are supplied with each unit.

65