Xerox 4500 ps eth instruction manual Define TCP/IP, Printing LPD, Define PPD

Configuration

Xerox 4500 PS ETH, Inst. & Operator's Guide

Define TCP/IP

To select and define TCP/IP session see the following sample configuration. The details on configuration parameters are available in Appendix A.

NOTE:

The values to be configured must match your environment.

BEGIN_CONFIGURATION TCPIP

BOOTP	YES
TCP_MSS	1400
TCP_WINDOW	4200
DEFAULT_IP	?????
DEFAULT_SM	?????
DEFAULT_GW	??????
END

Printing LPD

To select and define an LPD session see the following sample configuration.

BEGIN_CONFIGURATION LPD x
LPD_QUEUE	“LPDPRT1”
LPD_AUTOCR	NO
END

Define PPD

To select and define a PPD session see the following sample configuration. The details on configuration parameters are available in Appendix A.

NOTE:

The port values to be configured must match the values defined on the relevant host.

BEGIN_CONFIGURATION PPD X

PPD_PORT

RESPONSE

KEEPALIVE

END

PPD port selection for IPDS print: 5001 and 5002.

PPD port selection for ICDS print: 5005 and 5006.

70