Xerox 4500 ps eth Boot, Sharetimeout, Holdtimeout, Irqtimeout, Psname, Contactperson, Location

Appendix Section

Xerox 4500 PS ETH, Inst. & Operator's Guide

Range:	NO (0)
	YES (1)
Default:	YES
BOOT	The BOOT parameter causes the PrintServer to compare new
Description:
	and old settings. If the current configuration is identical to the
	new setting, the latter will become non-operational. If on the
	other hand the new setting is different from the current, the
	PrintServer is rebooted immediately.
Range:	NO (0)
	YES (1)
Default:	N/A

SHARETIMEOUT

Description:	Sets the share timeout value
Range:	0 - 9999 secs
Default:	20 secs
HOLDTIMEOUT
Description:	Sets the hold timeout interval for an Offline condition.
Range:	0 - 9999 secs
Default:	600 secs
IRQTIMEOUT
Description:	Sets the IRQ timeout value. Paper Error / Paper out conditions
Range:	0 - 9999 secs
Default:	60 secs
PS_NAME
Description:	An administratively assigned name for the managed
	node. By convention, this is the node’s fully qualified
	domain name.
Range:	255 ASCII characters
Default:	--

CONTACT_PERSON

Description: Textual identification of the contact person for this managed node together with information on how to contact this person.

Range: 255 ASCII characters Default:

LOCATION
Description:	The physical location of this node (be it building, floor or
	office room).
Range:	255 ASCII character
Default:

166