Xerox 4500 ps eth instruction manual Boot PrintServer after download

Configuration

Xerox 4500 PS ETH, Inst. & Operator's Guide

NOTE:

If the Monitor formdoes not appear by itself, click the Monitor form and select the “Discover” function to contact your device. The “Discover” function will perform a broadcast on your network contacting and subsequently listing all available devices. You can activate the “Discover” function from the “File” menu (see illustration above) or by clicking this icon:

When your device is listed in the Monitor form, highlight the device and click “OK” to download your new settings to it.

Boot PrintServer after download

You will find this option in the main menu “Hardware PS” Form.

If the new settings you have just downloaded differ from the current settings - and no error situations have occured - , the PrintServer will immediately be booted when ticking the field “ Boot PrintServer............” .

The display of warning messages does not prevent the PrintServer from being booted.

43