Xerox 4500 ps eth instruction manual ENP File Server in Psinst32, Ida

Novell Setup for IPX/SPX

Xerox 4500 PS ETH, Inst. & Operator's Guide

Below is a screen dump of the System Console after executing the CONFIG command:

File server name: CSE

IPX internal network number: 336DE04A

Node address: 000000000001

Frame type: VIRTUAL_LAN

LAN protocol: IPX network 336DE04A

Server Up Time: 12 Days 23 Hours 42 Seconds

IBM PCI Token Ring Adapter Hardware Specific Module Version 1.02 1 June 1996

Hardware setting: Slot 6, I/O ports 4400h to 44FFh, Interrupt Bh

Node address: 0004AC57BC49

Frame type: TOKEN-RING

Board name: IBMTRPO_1_TOK

LAN protocol: IPX network 00002001

IBM PCI Token Ring Adapter Hardware Specific Module Version 1.02 1 June 1996

Hardware setting: Slot 6, I/O ports 4400h to 44FFh, Interrupt Bh

Node address: 0004AC57BC49

Frame type: TOKEN-RING_SNAP

Board name: IBMTRPO_1_TSP

LAN protocol: ARP

LAN protocol: IP address 128.0.119.100 mask FF.FF.0.0 interfaces 1

Tree Name: IDA

Bindery Context(s):

cse.international.i-data

CSE:

NOTE:

Information for idaPrintServer Set-up:

“File server name” = “NCP Preferred Server” in Psinst32: CSE

“EPS File Server” in Psinst32:	CSE
“ENP File Server” in Psinst32:	CSE

Information for idaPrintServer Set-up:

“Tree Name” = “NCP Preferred DS-Tree” in PSinst32:

IDA

“Bindery Context” = “NCP DS Context” in PSinst32: cse.international.i-data

(the first Bindery Context is the context where the NW File Server is located in the NDS Tree).

94