Xerox 4500 ps eth When printing, Has an upgrade of microcode been performed?, Successfully

Problem Determination

Xerox 4500 PS ETH, Inst. & Operator's Guide

∙Make a list of all the symptoms you have recorded for subsequent problem determination.

Has an upgrade of microcode been performed?

Successfully

A successful microcode upgrade is indicated on the test printout with a new Version number.

Unsuccessfully

Turn the printer off for a few seconds and back on. If problems persist, revert to the microcode from the bootfile and repeat the upgrade process. Refer to the appendix section “ Microcode Upgrading”.

If the problem persists, refer to your general problem reporting proce dures or contact your point of purchase.

19.2.3 When printing

When operating via Win/OS2, you must make sure that the PrintServer is connected.

NetWare:

If you are printing via Novell NetWare you must check that the settings for the PSERVER (EPS) and the NPRINTER (ENP) are made correctly.

Make a settings printout to check whether you have configured correctly.

Below are examples of possible error situations and hints as how to remedy the situations.

NOTE:

When printing you should check the connection to the PServer viewing the NetWare menu “Active Connections”.

153