Xerox 4500 ps eth OS/2 Printing Using TCP/IP LPR/LPD, OS/2 printing via a print queue

OS/2 Printing Using TCP/IP LPR/LPD

Xerox 4500 PS ETH, Inst. & Operator's Guide

6. OS/2 Printing Using TCP/IP LPR/LPD

This chapter provides the three methods available for printing from OS/2 based PC’s with TCP/IP installed:

1.Via print queue output port sele ction (see Section 5.1 below for details).

2.Via redirection of LPTx port with LPR command (see Section 5.2 below for details).

3.Redirection of LPTx port with LPRMON command (see Section 5.3 below for details).

Once these parameters have been configured, and the basic TCP/IP installation of the Xerox 4500 PS ETH has been completed, direct printing from OS/2 will be possible.

6.1OS/2 printing via a print queue

1.Open the “Templates” folder.

2.Drag and drop the printer icon onto the desktop.

The “Settings” menu for the printer will now open automatically.

3.Give the printer a name and select the printer driver required.

4.Select the output port to be used by clicking one of the “LPD pipes”.

e.g. \PIPE\LPD0.

6.Give the LPD server a name

This may be either the IP address or the name which the Xerox 4500 PS ETH has been given on a Name Server.

7.Give the LPD printer a name

The default LPD printer names defined in Xerox 4500 PS ETH are LPTPRT1 and LPDPRT2.

The LPDPrt1acr and LPTPrt2acr may also be used if a <CR> is required at each linefeed.

The rest of the fields in this panel are optional.

101