Xerox 4500 ps eth instruction manual Appendix a 2 Configuration file parameters

Appendix Section

Xerox 4500 PS ETH, Inst. & Operator's Guide

END

6. Make a settings printout to verify the new settings.

Appendix A 2: Configuration file parameters

This appendix describes the entire range of parameters available for programming the PrintServer.

BEGIN_CONFIGURATION IDAPS

LOCAL_MAC

Description: Sets the locally administered MAC address

Range: 0x400000000000 - 0x7FFFFFFFFFFF

Default: N/A

SEL_MAC

Description: Selects the universally defined or the locally administered MAC address

Range: LOCAL (0) UNIVERSAL (1)

Default: UNIVERSAL

ENABLE_TCPIP

Description: Enables or disables the TCP/IP protocol

Range: NO (0)

YES (1)

Default: YES

ENABLE_NETWARE

Description:	Enables or disables NetWare (IPX/SPX)
	protocols.
Range:	NO (0)
	YES (1)
Default:	YES
ENABLE 802_2
Description:	Enables or disables the 802.2 settings
Range:	NO (0)
	YES (1)
Default:	YES

ENABLE_PU_LU

Description: Enables or disables the use of the NetWare (IPX/SPX) protocols.

165