Xerox 4500 ps eth instruction manual Windows NT version

WIndows NT Printing Using TCP/IP LPR/LPD

Xerox 4500 PS ETH, Inst. & Operator's Guide

Windows NT version 4.0

This section describes how to select an LPR/LPD printer from Windows NT version 4.0.

1.From your desktop, select “Start”, “Settings” and then “Printers”

2.Doubleclick “Add Printer”

3.Select “My Computer” and click “Next”

4.Click “Add Port”

5.Doubleclick “LPR Port”

6.Add IP address in “Name or address of server providing LPD” and add “LPDPRT1” in the field “Name of printer queue on that server”

7.Click “OK”

8.Close the form “Printer Ports” and click “Next” to move on

9.Now select manufacturer and printers for your printer and click “Next”

10.Select “Printer Name” and click “Next”

11.Select “Shared” or “Not Shared” and then operating system(s) to print to this printer

12.Click “Next”

13.Select “Test Page” and then click “Finish”

14.If the printer driver selected is not yet installed on your system or if you have selected another operating system to print from, you will be asked for your original Windows NT CD-ROM to install the printer driver from. Please follow the instruction given on this CD-ROM.

109