Xerox 4500 ps eth End of Configuration - Downloading Settings to the PrintServer

Configuration

Xerox 4500 PS ETH, Inst. & Operator's Guide

3.3.7 End of Configuration - Downloading Settings to the PrintServer

When you have completed the configuration of the selected protocol environment(s), you must download the new settings to the selected target port. This download target port must be via the LAN.

“Select DLC download port”

Choose the “Select Download Port” option from the “File” menu in the top left corner of the screen. The following form will be displayed:

- Download via LAN - select DLC (NOTE: Check installation)

When using LAN as download method, you will be presented with a dialog containing a list of discovered devices. The devices are discovered by MAC address. See the “Broadcasting” section 3.3.9.

Next, select the menu “Download” in the “File” menu which you will find in the top left corner of your main menu.

Now the Monitor form will appear listing all available devices on the network.

42