Innovative IP Voice & Video.

QUICK INSTALLATION AND CONFIGURATION

APPLICATION DESCRIPTION

GXW410x series can be deployed in the following enterprise topology:

GXW-410x Configuration

PSTN

 

FXO

 

 

lines

GXW4100

 

 

 

IP-PBX

Or

SIP Registrar

IP/LAN

IP/WAN

301

801

802

803

302

 

 

PSTN Analog Phones

Package and Installation

Unpack and check all accessories included:

one 12V universal power adapter,

one Ethernet cable,

one device unit.

WARNING: use only the power adapter included in the GXW-410x package. Using an alternative power adapter may permanently damage the unit.

Installation

1.Connect power and cables

2.Connect Ethernet cable to a hub and power adapter to power wall outlet

3.Assign GXW410x IP Address

4.Use another Ethernet cable to connect your PC to the same hub that GXW4100 is connected.

5.Assign your PC to a static IP that is within the same subnet of default IP address of GXW4100 192.168.0.160. i.e 192.168.0.x. X can be any number between 2 and 254 except 160.

6.Launch web browser and type http://192.168.0.160 at Address of web browser. This will let you to connect to build-in web server of GXW4100.

You may change to use DHCP or PPPoE connection or another static IP address according to your local network environment.

Simple Configuration As a Media Gateway to Access PSTN Networks

GXW410x can be configured to work with any leading SIP server, such as Asterisk, for a pure media gateway to access PSTN networks. In such applications, the user only needs to configure GXW410xgateway Stage Dialing field and Sip Server field.

For a simple set-up, users only need to configure a SIP server field for default SIP Profile 1. This field should be configured to point to the SIP server to be used with the GXW410x.

For advanced applications, the user is required to choose at least one SIP server field from the SIP profiles and one stage dialing under system Channel configuration table. On SIP server sides, the SIP server must be configured to forward user PSTN calls to the GXW410x.

Please be aware that by default, the system uses North American PSTN settings and TWO STAGE dialing to access PSTN networks for VOIP to PSTN calls and PSTN to VOIP calls. Two stage dialing means the end-user will hear dial-tone twice. First dial-tone is used to let users to input destination number in the same network of the calling networks. Second dial- tone is used to let users to input final destination number.

The GXW410x also supports ONE STAGE dialing, which means users only need to input one final PSTN number when first dial-tone is heard for calls from VOIP to PSTN. This requires configuring both SIP server and GXW410x to one stage dialing (see last section of quick guide and user manual for one stage dialing). For one stage PSTN to VOIP calls, user needs to configure off-hook auto dial field (see last section on sample configuration)

Extensive Configuration for Multiple Users

www.grandstream.com

info@grandstream.com

GXW-410x Quick Install Guide

VoIPon Solutions www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0) 1245 600560

Page 3
Image 3
Grandstream Networks GXW4108, GXW4104 manual Package and Installation, Extensive Configuration for Multiple Users