Lantronix XPress DR+ manual Host List Configuration, To configure the units host list

	Chapter 6: Configuration Using Web Manager
0x77FE Server Port	N/A
MTU Size	The Maximum Transmission Unit (MTU) is the largest physical
	packet size a network can transmit for TCP and UDP. Enter
	between 512 and 1400 bytes. The default setting is 1400
	bytes.

3.When you are finished, click the OK button.

4.To save and reboot, on the main menu, click Apply Settings.

Host List Configuration

The XPress DR+ scrolls through the host list until it connects to a device listed in the host list table. After a successful connection, the unit stops trying to connect to any others. If this connection fails, the unit continues to scroll through the table until the next successful connection.

The host list supports a minimum of 1 and a maximum of 12 entries. Each entry contains an IP address and a port number.

Note: The host list is disabled for Manual and Modem Mode. The unit does not accept a data connection from a remote device when the hostlist option is enabled.

To configure the unit's host list:

1. On the main menu, click Hostlist.

Figure 6-4. Hostlist Settings

2. Enter or modify the following fields:

XPress DR+ User Guide 50