SMC Networks SMC2670W manual Configure

Section 5 Configure

The EZ Connect Wireless Ethernet Adapter functions as a trans- parent device on your network by not requiring an IP address that is within the same subnet as your network. The steps out- lined below will guide you through the wireless settings and TCP/IP configuration.

Note: If you are using a Barricade Wireless Broadband Router or running a DHCP server with an IP address of 192.168.2.XXX, there should be no configuration required on the SMC2670W.

5.1 Configure the Wireless Ethernet Adapter using Windows-based Utility

1.Log into the SMC2670W using the Windows-based Utility. (see section 4.1 for more information)

2.When you log into the Windows-based Utility, the “INFO” page displays. To change your settings click the [SETUP >] button.

23