
Section 1 Getting Started
Site Location
Choose a location for your EZ Connect Wireless Ethernet Adapter. Usually, the best location is at the center of your wireless coverage area, and if possible within
Connect the Ethernet Cable
The EZ Connect Wireless Ethernet Adapter can be connected to any device that has a standard Ethernet connection. Use a standard Category 5 UTP Crossover Ethernet cable with an RJ- 45 connector to connect the Wireless Ethernet Adapter to any
Note: Do not connect this adapter directly to the LAN port of a router, such as the Barricade.
Connect the Power Cable
Connect the power adapter cable to the 5V DC power socket on the rear panel.
Warning: Use only the power adapter supplied with the SMC2670W. Using another power adapter will cause damage to the unit and void the warranty.
Antenna
Indicator Lights:
• Power
• Wireless Transmit/Receive
• Ethernet Link/Acivity
10