If you are still unable to get a wireless connection after verify- ing the settings listed above, then try to move the Wireless Ethernet Adapter closer to your Wireless Broadband Router/Access Point.
If the SMC2670W connects when you move it closer to the Wireless Broadband Router/Access Point then you configura- tion is correct.
If you still experience a connection issue after the steps out- lined above, please contact the SMC Technical Support Team at
2.I don’t know how to change the SMC2670W’s IP address.
There are two ways to change the IP configuration of the SMC2670W.
Using the Web-Based Utility:
a)Log into the
b)Click on the [TCP/IP] section link, and then click on the [Setup] link.
c)From this section, you can change the following:
•IP address
•Subnet Mask
•Gateway
When you have completed your changes, click the [Apply] button to save the new settings. To apply these new changes, you will need to reboot the SMC2670W. When prompted, click the [OK] button.
39