Chapter 6 Using Linker
Command Options 91
6.3.2 Error Message Options
Functional description
This option causes all error and warning messages and help screens sent to the console or the listing file
to appear in Japanese.
The character coding depends on the host machine and the operating system.
Rules of use
This option is specified with the hyphen (-) option specification character, followed by the lower-case
letter “j”.
ld103 -j sample.rf
NOTE: This option is not available on PC/AT machines.
Default specification
The default language used depends on the host machine and the operating system.
It is also possible to change the default message specification with an entry in the linker’s start-up file.
See Chapter 1 “Getting Started” Section 1.5 “Setup”.
j Output error and warning messages in Japanese
Host machine Character coding
Sun/Parc EUC
DOS/V Shift JIS
PC/AT not supported
Host machine Character coding
Sun/Parc English
DOS/V Japanese in Shift JIS
PC/AT English