HP OneView A.5.3.3 Configuring the network sets

The following illustration shows the Networks screen after you add the Ethernet networks.

A.5.3.3 Configuring the network sets

You use network sets to create multiple networks per connection. During this task, you will use the smart search features of the appliance to quickly narrow down the list of networks to those networks you will add to the network set.

1.From the main menu, select Network Sets, and then click + Create network set in the master pane.

The Create network set dialog box opens.

2.For all of the network sets in this data center, use the defaults displayed on the screen for Type, Preferred Bandwidth, and Maximum Bandwidth.

3.Create the network set for the production networks:

a.For Name, enter prod networks and click Add networks.

The Add Networks to prod networks dialog box opens. All Ethernet networks that have been configured on this appliance are listed in alphabetical order.

b.In the search box, enter prod.

The Add Networks to prod networks dialog box displays only the networks with names beginning with prod.

To learn more about searching and filtering, which is available throughout the appliance, see “Search resources” (page 67).

c.Select all of the prod networks listed and click Add (see the following illustration).

TIP: You can use the Ctrl key to select multiple networks at once.

242 Step by step: Configuring an example data center using HP OneView