HP OneView esxi mgmt, prod networks, Add two connections to the, Add two connections to the

a.Add two connections to the esxi mgmt 1131 network. When you finish entering the information for a connection, click Add + to add this connection and reopen the dialog box so that you can add the connections in the next step.

Attribute	Value
Device type	Ethernet
Network	esxi mgmt 1131
Requested bandwidth	2.5 (the default value)
FlexNIC	Auto (the default value)
Boot	For the first connection, select Primary. For the second connection, select
	Secondary.

b.Add two connections to the esxi vmotion 1132 network. Because the configuration is the same for both connections, you can enter the information, and then click Add + twice to add both connections and reopen the dialog box for the next step.

Attribute	Value
Device type	Ethernet
Network	esxi vmotion 1132
Requested bandwidth	2.5 (the default value)
FlexNIC	Auto (the default value)
Boot	For both connections, select Not bootable

c.Add two connections to the esxi vmotion 1132 network. Because the configuration is the same for both connections, you can enter the information, and then click Add + twice to add both connections and reopen the dialog box for the next step.

Attribute	Value
Device type	Ethernet
Network	esxi vmotion 1132
Requested bandwidth	2.5 (the default value)
FlexNIC	Auto (the default value)
Boot	For both connections, select Not bootable

d.Add two connections to the prod networks network set. Because the configuration is the same for both connections, you can enter the information, and then click Add + twice to add both connections and reopen the dialog box for the next step.

Attribute	Value
Device type	Ethernet
Network	prod networks
Requested bandwidth	2.5 (the default value)
FlexNIC	Auto (the default value)
Boot	For both connections, select Not bootable

252 Step by step: Configuring an example data center using HP OneView