HP OneView manual ProdUS, DevUS, TestUS

e.Add the ESXi networks:

i.In the search box, enter esx to display only the ESXi networks.

ii.Select all of the EXSi networks listed.

TIP: Select all networks listed by pressing and holding either Shift or Ctrl and then left-clicking the networks. Alternatively, select one of the networks and then use Ctrl+A to select all of the networks listed.

iii.Click Add.

f. Add the uplink ports:

i.Click Add uplink ports to open the Add Uplink Ports to esxUS dialog box.

ii.In the search box, enter x1 to display only the interconnects that have X1 ports available.

iii.Select the two interconnects displayed and click Add.

iv.Do not select a preferred port.

g.Click Create + to add the esxUS uplink set to the EsxFlexFabricLIG logical interconnect group and reopen the Add uplink set screen.

3.Add the uplink sets for the production networks, development networks, and test networks. As you add networks to uplink sets for the logical interconnect group, note that the networks that have already been added to an uplink set are not listed.

Networks	Uplink set	Interconnect port
production networks	prodUS	X2
development networks	devUS	X8
test networks	testUS	X5

When you finish entering the values for the last uplink set you want to create, click Create to add the uplink set and close the dialog box. The Create logical interconnect group screen opens (see the following illustration).

A.5 Provisioning eight host servers for VMware vSphere Auto Deploy 247