12 Quick Start: Configuring an enclosure and server blade for Direct attach to an HP 3PAR Storage System

This quick start describes the process for adding and configuring an enclosure so that its servers can connect to an HP 3PAR Storage System that is directly attached to the enclosure.

For a step-by-step illustrated example of this scenario (except that configuring the enclosure group and logical interconnect occurs during the enclosure add operation), see “Configuring a server blade to boot from the attached HP 3PAR Storage System” (page 256).

Prerequisites

Minimum required privileges: Infrastructure administrator or Network administrator for adding the networks.

Minimum required privileges: Infrastructure administrator or Server administrator for adding the enclosure and server profiles.

The HP 3PAR Storage System is installed and configured and the cables are attached to the enclosure you want to use.

See “Prerequisites for bringing an enclosure under management” (page 131) for prerequisites and preparation you must complete before you add an enclosure.

See “Prerequisites for bringing server hardware under management” (page 112) for prerequisites and preparation you must complete before you add a server.

105

Page 105
Image 105
HP OneView manual 105