Monitoring power and temperature utilization

To change the data center view, do one or more of the following:

•Move the horizontal slider left to zoom in and right to zoom out.

•Move the vertical slider up and down to change the vertical viewing angle.

•Click and drag the rotation dial to change the horizontal viewing angle.

25.1.2Monitoring power and temperature utilization

Utilization statistics for power and temperature are displayed on:

•The Utilization panel

•Utilization graphs in the Utilization view

◦Power utilization metrics

◦Temperature utilization metrics

The Enclosures, Power Delivery Devices, and Server Hardware screens display a Utilization panel in the Overview for each resource.

The possible states of the Utilization panel are:

Panel contents

Utilization meters display utilization data. A licensing message is displayed.

no data is displayed.

not set is displayed (a gray meter with hash marks).

Reason

The appliance has collected data and it is being displayed.

Server hardware without an iLO Advanced license will not display utilization data.

The appliance has not collected data during the previous 24 hours.

The meter might not be set for the following reasons:

•The page is loading and the data is not yet available.

•There is no utilization data prior to the most recent 5–minute collection period. There may be historic data in the utilization graphs.

•Enclosures will not display temperature data if none of the server blades are powered on.

Utilization data gathering is not supported on the device.

See the online help for Utilization for more information.

The appliance gathers and reports CPU, power consumption, and temperature data for certain resources via utilization graphs.

NOTE: The minimum data collection interval is five minutes (averaged) and the maximum is one hour (averaged).

Utilization graphs can display a range of data up to a maximum of three years.

25.1 UI power and temperature monitoring 181