1.In the master pane of the Server Profiles screen, select win2k12 boot from 3PAR. The appliance displays the details about the server profile in the details pane.

2.In the Connections panel, scroll so that the two Fibre Channel connections are visible.

3.Record the WWPN information for FlatSAN A and FlatSAN B.

A.7 Bringing an HP ProLiant DL360p Gen8 rack mount server under management

This example demonstrates bringing the following HP ProLiant DL360p Gen8 rack mount server under management.

Attribute

Description

 

 

 

Model

HP ProLiant DL360p Gen8

 

 

Name

DL360pGen8-1796

 

 

 

iLO IP address

172.18.6.15

 

 

 

 

iLO administrator credential:

User name

iLOAdmin

 

Password

S&leP@ssw0rd

 

 

 

Physical location

Rack 173, U26

 

 

 

 

Assumptions

The appliance is installed.

The iLO management processor for the server is configured with the IP address and administrator credentials listed in the preceding table.

The server is connected to a live power source.

You do not have an embedded license for this server, but all of the other servers managed by the appliance have licenses.

Because this is an HP ProLiant DL rack mount server:You cannot use this appliance to provision any networks for the server.You cannot assign a server profile to the server.A.7.1 Workflow1.“Adding the server hardware” (page 265).2.“Powering on the server” (page 265).3.“Viewing information about the server” (page 265).4.“Adding a license for the server” (page 267).

264 Step by step: Configuring an example data center using HP OneView