HP OneView manual Device type Fibre Channel Network, FlatSAN a

•For Server hardware type, select BL460c Gen8 Standard.

•For Enclosure Group, select DirectAttachGroup.

•For Firmware Baseline, select Manage manually.

3.Click Add Connection to open the Add Connection dialog box.

4.Add two connections to the prod networks network set. Because the configuration is the same for both network sets, you can enter the information, and then click Add + twice to add both connections and reopen the dialog box for the next step.

Attribute	Value
Device type	Ethernet
Network	prod networks
Requested bandwidth	2.5 (the default value)
FlexNIC	Auto (the default value)
Boot	For both connections, select Not bootable.

5.Add one connection to the FlatSAN A network. Enter the information shown in the following table, and then click Add + to add the connection and reopen the dialog box for the next step.

Device type	Fibre Channel
Network	FlatSAN A
Requested bandwidth	2.5 (the default value)
FlexNIC	Auto (the default value)
Boot	Not bootable

A.6 Configuring a server blade to boot from the attached HP 3PAR Storage System 261