HP OneView Table 1 Required ports, 2.Press and hold Ctrl+Alt, 3.Press and release the space bar, Press and release F1 to select the

information on obtaining a certificate with a browser, see “Managing certificates from a browser” (page 50)

3.12 Ports needed for HP OneView

HP OneView requires specific ports to be made available to the appliance to manage servers, enclosures, and interconnects.

Table 1 Required ports

Port number	Protocol	Usage	Description
80	TCP	Inbound	Used for HTTP interface. Typically, this port redirects to port
			443; this port provides the access that iLO requires.
123	UDP	Inbound	HP OneView acts as an NTP server, both iLO and Onboard
			Administrator require access.
123	UDP	Outbound	The appliance uses this port as an NTP client to synchronize
			the appliance time.
161	UDP	Outbound	Supports SNMP GET calls to obtain status data from a server
			through iLO. Also used for iPDU.
162	UDP	Inbound	Used for SNMP trap support from the iLO, Onboard
			Administrator, and iPDU devices.
443	TCP	Inbound	Used for the HTTPS interface to user interface and APIs.
443	TCP	Outbound	Used for secure SSL access to the iLO and Onboard
			Administrator. Used for RIBCL, SOAP, and iPDU
			communication.
2162	UDP	Inbound	Used as an alternative SNMP trap port.
5671	TCP	Inbound	Used to allow external scripts or applications to connect to
			and monitor messages from the SCMB (State Change Message
			Bus).
17988	TCP	Browser to iLO	Provides browser access to the remote console.
17990	TCP	Browser to iLO	Provides remote console access to iLO virtual media.

3.13 Access to the appliance console

Restrict access to the appliance console (by using the hypervisor management software) to prevent unauthorized users from attempting to access the password reset and service access features. See “Restricting console access” (page 54).

Typical legitimate uses for access to the console are:•Troubleshooting network configuration issues•Resetting an appliance administrator password.•Enabling service access by an on-site authorized support representative.

The virtual appliance console is displayed in a graphical console; password reset and HP Services access use a non-graphical console.

Switching from one console to another1.Open the virtual appliance console from vSphere.2.Press and hold Ctrl+Alt.3.Press and release the space bar.

4.Press and release F1 to select the non-graphical console or F2 to select the graphical console.

3.12 Ports needed for HP OneView 53