HP OneView manual

3.Click Add to add the enclosure.

The appliance discovers the interconnects in the enclosure, creates a logical interconnect group, and opens the Edit DirectAttachGroup logical interconnect group screen (see the following illustration).

4.Add the uplink sets for the Flat SAN networks:

a.Click Add uplink set.

The Add uplink set screen opens.

b.Configure the uplink set for the FlatSAN A Fibre Channel network.

•For Name, enter FlatSAN A.

•For Type, select Fibre Channel.

When you select Fibre Channel, the screen expands to include additional configuration items.

•For Network, select FlatSAN A.

c.Configure the uplink ports:

i.For Interconnect under Uplink Ports, select Interconnect: 1.

The ports that can be used for Fibre Channel networks are displayed.

ii.Select ports X3 and X4.

d.Click Create + to add the FlatSAN A uplink set to the logical interconnect group and reopen the Add uplink set screen.

5.Add the uplink set for the FlatSAN B Fibre Channel network:

a.For Name, enter FlatSAN B.

b.For Type, select Fibre Channel.

258 Step by step: Configuring an example data center using HP OneView