Speco Technologies CS4, CS8 manual Error Code Notices, Troubleshooting, Problem Possible Solution

4- & 8-Channel Digital Video Recorder

Error Code Notices

	System Upgrade Related		Clip Copy Related
No.	Description	No.	Description
0	Unknown error.	0	Unknown error.
1	File version error.	1	Device error.
2	Operating system version error.	2	Mounting failed.
3	Software version error.	3	No media.
4	Kernel version error.	4	Invalid media.
100	Upgrade device mounting failed.	5	File already existed.
101	Package is not found.	6	Not enough space.
102	Extracting package failed.	7	Creating temporary file failed.
103	LILO failed.	8	Opening disk failed.
104	Rebooting failed.	9	Formatting disk failed.
105	Invalid package.	10	Database has been changed.
300	Remote connection failed.	11	Appending failed.
301	Remote network error.	12	Bad sector.
302	Remote upgrade is not authorized.	13	No executable file.
303	Saving remote package failed.	14	Opening executable file failed.
304	Remote upgrade is cancelled by the user.	15	Writing executable file failed.
400	USB device mounting failed.	16	Creating image failed.
401	Reading upgrade package on the USB
	device failed.
402	Copying upgrade package on the USB
	device failed.
500	System is busy clip copying.

Troubleshooting

Problem	Possible Solution
No Power	 Check power cord connections.
	 Confirm that there is power at the outlet.
	 Check camera video cable and connections.
No Live Video	 Check monitor video cable and connections.
	 Confirm that the camera has power.
	 Check camera lens settings.
DVR has stopped	If hard disk drive is full, you will either need to delete video or set
recording	the DVR to the Overwrite Mode.
The icon displays,	When the DVR is in the Pre-Event recording mode, the yellow
	and display when there is no event, and the DVR is not recording.
however, the DVR is not
	The red and display when any event occurs and the DVR starts
recording.	recording.

85