Operation Instruction
Highlight the box beside To and press the Off, you can enter a specific Date and Time. image.
button to toggle between On and Off. When set to When set to On, the search will be to the last recorded
Highlight the box beside Check Time Overlap and press the 
button. It toggles between On and Off. You will only be able to turn the Check Time Overlap on or off if a
Highlight the box beside 
button. You can select the alarm inputs that you want to include in your search.
Highlight the box beside Motion and press the 
button. You can select the cameras for which you want any reports of motion detection.
Highlight the box beside Video Loss and press the 
button. You can select the cameras for which you want any reports of lost video.
Highlight the box beside Video Blind and press the 
button. You can select the cameras for which you want any reports of blind video.
Highlight the box beside 
button. You can select the
Highlight the box beside Record Channels and press the 
button. You can select the cameras that you want to search for any reports of event recorded data. The DVR will display the events (not the camera channels) that occurred and that also are recorded on the camera channel that you selected. If you do not select a camera channel in this field, the DVR will search events that are not associated with cameras.
You can also toggle On and Off
Panic Record
Check Recording
Check
Disk Almost Full
Disk Bad
Disk Temperature
Disk S.M.A.R.T.
Disk Config Change
Once you set your desired search conditions, highlight Search and press the 
button to display the search results in the Event Log Search screen. Selecting Cancel exits the screen without saving the changes.
70
