4- & 8-Channel Digital Video Recorder
Figure 34 ─ Video Loss Actions setup screen.
The DVR can be set to react to video loss differently for each camera. Each camera can be associated with another camera, trigger an
Highlight the box under the Record heading and press the 
button. A list of cameras appears. You can associate as many cameras with that camera as you wish. If the DVR detects video loss on the selected camera, it starts recording video from all the associated cameras.
NOTE: For the Record action, the camera you select should be set to the Event or Time & Event recording mode in the Record Schedule setup screen.
Highlight the box under the 
button. Select between Alarm Output and Beep (DVR’s internal buzzer) that you would like to activate and to sound whenever the DVR detects video loss on the selected camera.
NOTE: For the
Highlight the box under the Notify heading and press the 
button. You can toggle the entire list On and Off by highlighting Notification and pressing the 
button. You can toggle the individual items On and Off by highlighting that item and pressing the 
button. Highlight OK and press the 
button to accept your changes.
NOTE: For the Notify action, the notify item you select should be enabled in the Notification setup screen and the DVR should be registered in the Speco Central (Remote Administration System).
Highlight the desired box under the PTZ heading, and press the 
button. A list of PTZ presets appear. Select the preset position for each PTZ camera, where you want PTZ cameras to move to when the DVR detects video loss on the selected camera’s input.
Video Blind
Highlight Video Blind in the Event menu and press the 
button. The Video Blind setup screen appears.
35
