Operation Instruction
NOTE: When the DVR is in the Time or Time & Event mode, it ignores the
Event Setup
Figure 26 ─ Event menu.
Alarm-In
Highlight 
button. The
| The alarm terminal strip on the back of the DVR |
| has inputs associated with each alarm. You can |
| set up each input on the |
| can turn each input On or Off by highlighting |
| the alarm number and pressing the button. |
| Each input can be given a title. Highlight the |
| desired Title box and press the button. A |
| virtual keyboard appears allowing you to enter |
| a title name. |
| Each input can be set as NO (normally open) or |
Figure 27 ─ | NC (normally closed). |
|
You can set up the DVR to start panic recording whenever it senses an input on one of its alarm input connectors. Highlight the box beside Panic Record and press the 
button. A list of Alarm Inputs appears, and you can select which alarm input you want associated with panic recording. The DVR will continue panic recording until an input on the selected alarm input is released as long as 
(Panic) in the Live Monitoring menu is not selected to stop the panic recording.
Highlight the Actions 1 and Actions 2 tabs, and the Actions 1 and Actions 2 setup screens appear.
30
