ZyAIR
Make sure the antennas are securely screwed onto the antenna
connectors.
Figure 24 Attaching Antennas
5 Troubleshooting
| Table 4 Troubleshooting |
|
|
PROBLEM | CORRECTIVE ACTION |
|
|
None of the LEDs | Make sure that you have the correct power adaptor connected to the ZyAIR and |
turn on when you | plugged in to an appropriate power source. Check all cable connections. |
turn on the ZyAIR. | If the LEDs still do not turn on, you may have a hardware problem. In this case, you |
| |
| should contact your local vendor. |
|
|
Cannot access the | Check the cable connection between the ZyAIR and your computer or hub. Refer to |
ZyAIR from the LAN. | section 1.1 for details. |
| Ping the ZyAIR from a LAN computer. Make sure your computer’s Ethernet adapter |
| is installed and functioning properly. |
| Make sure that the IP address and the subnet mask of the ZyAIR and your |
| computer(s) are on the same subnet. |
|
|
20
