ZyAIR
Select PPTP if your service provider uses a DSL terminator with PPTP login. The ZyAIR must have a static IP address (My IP Address) in this case, and a subnet mask (My IP Subnet Mask) if provided by your ISP.
Enter the DSL terminator IP address (PPTP Server IP Address) and a username with an associated password.
See the PPPoE encapsulation screen for information on PPP MTU, TCP MSS, Connect On Demand and Keep alive.
If your ISP has provided a connection ID name, enter it in the Connection ID/Name field.
Click Next to continue.
Figure 8 Internet Connection: PPTP
2.Use the second wizard screen to set up the wireless LAN.
ESSID is a unique name to identify the ZyAIR in the wireless LAN. Enter a descriptive name.
Select a channel (range of radio frequencies used by IEEE 802.11b wireless devices) from the
WEP (Wired Equivalent Privacy) encrypts data frames before transmitting them over the wireless network.
Select 64 Bit, 128 Bit or 256 Bit from the WEP Encryption and enter a key of the appropriate length to activate WEP encryption. Select Disable to turn off WEP data encryption.
Figure 9 Wireless Settings
Click Next to continue.
3.Use the third wizard screen to configure a backup
9
